Find your next opportunity

Job summary

The technician will perform field instrumentation and control-system pre-commissioning, commissioning, loop testing, and functional verification. They will also support the safe turnover of systems to operations by coordinating with various disciplines and maintaining accurate documentation.

Job details

About the job: Kent is looking for Instrumentation Commissioning Technicians to support the Kearl In-Pit Tailings Area 2 (ITA2) Project. The technician will perform field instrumentation and control-system pre-commissioning and commissioning, complete loop and functional testing, troubleshoot devices and signals, and support the safe turnover of systems to Operations. The role works closely with commissioning leadership, Construction, Systems Completion, Operations, Engineering, vendors, and other disciplines. Skills and Responsibilities: Responsibilities: Commissioning Execution and Field Support • Execute instrumentation pre-commissioning, commissioning, start-up, loop testing, functional testing, and cause-and-effect verification in accordance with approved procedures, work packs, drawings, and schedules. • Inspect, calibrate, configure, and test field instruments and associated equipment, including pressure, temperature, level, flow, analytical, vibration, control valve, shutdown, and package instrumentation. • Perform point-to-point checks, loop checks, input/output verification, alarm and trip testing, valve stroking, interlock testing, and signal validation within the individual’s training and authorization. • Support integration testing involving field devices, programmable logic controllers, distributed control systems, safety instrumented systems, motor controls, and packaged equipment. • Assist with troubleshooting calibration, wiring, communication, configuration, control logic, and device-performance issues; escalate complex or safety-critical conditions. • Confirm test prerequisites, system boundaries, permits, isolations, approved bypasses or inhibits, test equipment, and stakeholder readiness before work begins. • Coordinate with commissioning, electrical, mechanical, construction, operations, engineering, control-system specialists, and vendors to remove constraints and maintain safe work fronts. Systems Completion and Documentation • Complete commissioning check sheets, calibration records, loop folders, test records, deficiency reports, redlines, and turnover documentation using SCDB or an equivalent system. • Verify installation completeness and readiness against piping and instrumentation diagrams, loop drawings, hook-up drawings, instrument indexes, data sheets, cause-and-effect matrices, and control narratives. • Identify, record, and support closure of punch list items, deficiencies, and non-conformances required for system turnover. • Maintain calibrated test equipment and clear, traceable records of configurations, set points, tests, and completed work. Safe Work and Quality • Comply with permit-to-work, lockout/tagout, isolation, energized electrical work restrictions, process containment, bypass and inhibit control, and Safety-in-Transition requirements. • Participate in toolbox talks, field-level risk assessments, pre-job meetings, and safe work observations; stop work when conditions are unsafe or outside the approved scope. • Perform work in accordance with applicable codes, client requirements, project specifications, approved set points, commissioning procedures, and quality standards. • Communicate shift progress, constraints, active bypasses or inhibits, outstanding deficiencies, and safety concerns clearly to the supervisor and incoming crew. In addition to the responsibilities listed herein, the employee may be required to perform other ad-hoc tasks as needed or directed by the supervisor or management. These tasks will be within the reasonable scope of the employee's skills, capabilities, and role within the organization. The intent of this provision is to allow for flexibility and adaptability in meeting the dynamic needs of the organization, ensuring that operational requirements can be met efficiently. All such tasks will be assigned considering the employee's current workload and with respect to their professional development. Your knowledge/skills, education, and experience: Knowledge/ Qualification/ Training/ Certification: • Journeyperson Instrumentation and Control Technician certification recognized in Alberta, or a diploma in Instrumentation Engineering Technology with equivalent industrial field experience; Interprovincial Red Seal endorsement is preferred where applicable. • Previous instrumentation commissioning, start-up, maintenance, or construction experience on oil sands, oil and gas, mining, or large industrial projects. • Working knowledge of piping and instrumentation diagrams, loop drawings, instrument data sheets, cause-and-effect matrices, control narratives, and commissioning test documentation. • Demonstrated ability to use calibration and test equipment safely and to configure common smart instruments and final control elements. • Experience with DCS, PLC, SIS, asset management tools, and systems completion databases such as SCDB or equivalent is an asset. Communication: • Excellent command of the English language, with clear oral and written communication skills. • Able to prepare accurate field records, shift handovers, deficiency descriptions, and commissioning documentation Behavior/ Core Competencies: • Safety-focused, methodical, and disciplined in managing permits, isolations, bypasses, inhibits, procedures, and system boundaries. • Strong diagnostic, documentation, organization, and field coordination skills with close attention to detail. • Able to work across instrumentation, controls, electrical, mechanical, and process interfaces and communicate technical issues clearly. • Comfortable working outdoors in an active industrial environment and performing the physical duties of the position while wearing required personal protective equipment. HSSEQ: The Employee shall observe the Health, Safety, Sustainability, Environment and Quality rules of the Company; it’s clients and the governing authorities of the host country. Details about the role: Location: Kearl Oil Sands Project, Fort McKay, Alberta Relocation required: No Travel required: 14 days on / 7 days off rotation; flights provided from Edmonton or Calgary only Contract type: Project based Experience level: 5+ years About you: Join us. Unleash your energy within. If you have world-class ambitions to reach the stars while keeping your feet on the ground, we’re the team for you. We've created a new breed of company – future-focused with reimagined ambition across all disciplines within the energy sector. We love people who know their own potential and are not afraid to use it. We know that together, we’re far more than the sum of our parts. So, we celebrate people who want to grow and develop as we work together on some of the largest projects on the energy world stage. We are committed to our diverse and inclusive community – a place where we can all be ourselves, thrive and develop. From day one, we offer a range of family-friendly, inclusive employment policies, flexible working arrangements, and employee networks to support staff from different backgrounds. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures, and abilities. We’re a disability-friendly employer and can make adjustments to support you to perform at your best during the recruitment process. Our purpose and beliefs: As Kent, we’re tackling the greatest challenge of our time - to bring our world the energy it needs in the most responsible way ever imagined. It’s the energy of every member of our team driven by our beliefs that is making this happen. Whatever our skill, our language, or our culture. These beliefs define and direct us every day to be the very best - for ourselves, our clients, our key stakeholders, the communities we operate in and the planet: We PLAY BIG We thrive on EMOTIONAL AGILITY We are FANATICAL ABOUT PERFORMANCE We are built on INFINITE THINKING Read more about the Purpose, Beliefs and Guiding Principles that drive us [https://kentplc.com/who-we-are/purpose-beliefs]: Our vision for Diversity, Inclusion and Belonging: We recognise that diversity & inclusion are catalysts for success. We’re heightening awareness on the benefits of people diversity, diversity of experiences and diversity of our perspectives. Creating a culture of inclusivity where all employees feel a sense of belonging. Our combined energy is fueled by different nationalities, across 6 continents and 24 countries. Our commitment is to celebrate character – no matter what ethnic background, gender, age, religion, identity, or disability.

What you’ll do

The technician will perform field instrumentation and control-system pre-commissioning, commissioning, loop testing, and functional verification. They will also support the safe turnover of systems to operations by coordinating with various disciplines and maintaining accurate documentation.

Requirements

Candidates must hold a Journeyperson Instrumentation and Control Technician certification or a diploma in Instrumentation Engineering Technology. At least 5 years of experience in instrumentation commissioning, start-up, or construction within industrial projects is required.

Benefits

• Family-friendly employment policies • Inclusive employment policies • Flexible working arrangements • Employee networks

Listed skills

• Technical Documentation · Preferred
• Troubleshooting · Preferred

Other relevant skills

Identified from the job description. Confirm important requirements above.

• Instrumentation
• Commissioning
• Loop testing
• Functional testing
• Calibration
• Troubleshooting
• DCS
• PLC
• SIS
• Control systems
• Piping and instrumentation diagrams
• Safety instrumented systems
• Signal validation
• Industrial field experience
• Systems completion
• Technical documentation
• Configuration Management
• Authorization (Computing)
• Communication
• Management
• Operations
• English Language
• Coordinating
• Troubleshooting (Problem Solving)
• Asset Management
• Leadership
• Detail Oriented
• Adaptability
• Oil and Gas
• Risk Analysis
• Personal Protective Equipment
• Electrical Wiring
• Control Systems
• Punch Work
• Technical Issues
• Integration Testing
• Test Equipment
• Lock Out / Tag Out
• Instrumentation Engineering
• Motor Controllers
• Functional Testing
• Programmable Logic Controllers
• Distributed Control Systems
• Piping And Instrumentation Diagram
• Red Seal Certification
• Safety Instrumented Systems
• Control Valves

Job areas

• Energy
• Engineering
• Construction
• Trades
• Commissioning Technician
• Instrumentation Technician
• Electronics Engineering Technicians
• Electrical and Electronic Engineering Technologists and Technicians