Quality Assurance Composite Assembly Inspector
MAIN RESPONSIBILITIES
Assembly Inspection/Paint Inspection
Visual Inspection
Verify potting material shelf life
Verify that inserts, components, etc. are installed as per drawing.
Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.
Dust inclusions, orange peel, tears, sagging or blistering.
Inspecting parts to planned MIDs and Inspection documents , drawings etc.
Recording of nonconformities and quarantining non conforming parts with red tags.
Create and maintain inspection plans and procedures.
Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc..
Perform First Article Inspections to AS9102 requirements.
Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
Serve as a guide to Assembly technicians by sharing requirements and acceptance criteria for Inspection.
Participate in all initial and recurrent training to maintain certifying staff authorities.
Trim Inspection
Verification of tool validity
Visual Inspection
Inspection of parts to planned MIDs and Inspection documents , drawings etc.
Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
Recording of nonconformities & quarantining non conforming parts with red tags.
Shipping Inspection
Verify that all inspection stages have been completed.
Inspecting parts to planned MIDs and Inspection documents , drawings etc.
Recording of nonconformities & quarantining non conforming parts with red tags.
Preparation of shipping documentation including Form Ones and C of Cs.
Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
Participate in all initial and recurrent training to maintain certifying staff authorities.
Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
Lay-up Inspection
Review all materials in kits for shelf life & out life remaining
Verification that all materials have been cut & identified with ply number & orientation
Verification that Material Identification Sheets are complete.
Verification validity of tooling.
Visual Inspection to planned MIDs and Inspection documents , drawings etc.
Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
Serve as a guide to Layup technicians by sharing requirements and acceptance criteria for Inspection.
Recording of nonconformities & quarantining non conforming parts with red tags.
Core Inspection
Verification validity of tooling
Verification of conformity to templates and drawings
Visual Inspection for damage, cell ruptures, contamination dust /oil
Inspection of parts to planned MIDs and Inspection documents , drawings etc.
Recording of nonconformities & quarantining non conforming parts with red tags.
Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
MINIMUM JOB REQUIREMENTS
Education:
College Diploma (Mechanical Engineering Technician or Technologist) or relevant experience
Experience:
5 years of composite experience (Manufacturing/Assembly Inspection), specifically with a Quality Assurance System (ISO 9001, AS 9100)
NDT/Ultrasonic Inspection experience an asset
Knowledge, Skills, Demonstrated Capabilities:
Ability to work under broad supervision
Independent and able to work with a team
Attention to detail
Able to manage time effectively and prioritize work
Professional working relationships with internal and external sources, including regulatory and quality certified agencies
Able to work under pressure to meet demanding work schedules
Excellent verbal and written communication skills
Excellent problem solving skills
Able to write accurate technical reports
Ability to read various Blueprints
Able to use measurement tools
Must be able to legally work in Canada
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.
Company:
Airbus Helicopters Canada LtdEmployment Type:
Permanent-------
Experience Level:
ProfessionalJob Family:
Quality InspectionBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.
Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.
At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.